How do you make bladed jigs?

Question

FishGPT · Accepted Answer

Bladed jigs, or chatterbaits, are all about pairing vibration with a lure that fish can see and feel. Here’s a practical, DIY-friendly guide that bass anglers can actually run with on the water. You’ll see how to assemble from common parts, plus handy tips and links to tutorials and components.

What you’ll need (basic setup):
- A jig head (3/8 oz is a solid starting point for many bass spots; scale up or down for depth and cover). 
- A blade (brass or steel; bigger blades push more vibration, smaller blades give subtle thump). 
- A clevis or split-ring connector to join blade to the jig head. 
- A sturdy wire arm to keep the blade offset and free to vibrate.
- A skirt or soft plastic trailer to add motion and color against the blade’s flash.

How to assemble (one reliable method):
1) Attach the jig head as your base. If you’re building from components, secure the head to a short wire arm welded or crimped to a small eyelet. 
2) Create a short wire arm that will hold the blade clear of the jig’s body. Use a small loop at the blade end and a loop or eyelet at the base that slides onto the clevis/split-ring.
3) Connect the blade to the arm with a clevis or split ring. The goal is to let the blade rotate and vibrate freely without binding against the jig head or skirt.
4) Slide the skirt and/or attach a soft trailer to the jig head. The skirt adds water-packing color and the trailer gives you a natural motion in the strike zone.
5) Tune alignment: angle the blade slightly so it clears the skirt and locks into the water with a strong thump when you retrieve. If the blade hits the line or the skirt, bend the arm or adjust the clevis angle a few degrees.

Tips and technique: 
- Start with a steady, fast-pace retrieve to provoke reaction strikes, then slow and pause to let the blade thrum in place. If bites drop off, swap blade sizes or colors to locate what tuna-like bass in your lake respond to best. 🎣✨
- Experiment with different blade-to-jig clearances. A 1–2 mm gap can wildly change thump versus flash.
- If you want to jump-start your build, you can grab blade components and jig heads from kits like this: [MadBite by KastKing Bladed Jig Fishing Lures](https://www.amazon.com/dp/B08RK16951) and get a sense of proven color and blade choices. [MadBite by KastKing Bladed Jig Fishing Lures](https://www.amazon.com/dp/B08RK16951) also pairs well with jigs and skirts in bass-friendly kits.

DIY inspiration and step-by-step visuals are available in several tutorials, such as: 
- [Unbelievable Chatterbaits - Make Bladed Jigs Yourself with these Simple Tricks!](https://www.youtube.com/watch?v=ZUEXkUpKOzs) 🧰
- [How to Make a HOMEMADE Chatterbait (Less than $5)](https://www.youtube.com/watch?v=oGMqMbn8u5Q) 🛠️
- [How to make Micro Bladed Jigs](https://www.youtube.com/watch?v=S24dRDDt9vg) 🎯
- [How To Make A Bladed Jig!](https://www.youtube.com/watch?v=kUc9lOTujlY) 🔩

Practical tip: when you’re testing new blades, perform a quick on-water “twist test.” Hold the rig by the line and give the jig a light twitch; you should see the blade rotate and generate a vibration. If it’s sluggish, adjust the blade angle or clevis angle so it has room to move without rubbing.

Weather note (early fall context): bass tend to tighten around weed lines and drop-offs as temps shift. A vibrating jig is especially effective here because the blade’s thump helps trigger bites from fish that are feeding up before winter. Start shallow along edges, then work deeper as you evaluate the bite, and don’t be shy about color and blade-size shifts when water clarity changes. 🐟🍁

References (APA style):

Unbelievable Chatterbaits - Make Bladed Jigs Yourself with these Simple Tricks! (n.d.). YouTube. https://www.youtube.com/watch?v=ZUEXkUpKOzs
How to Make a HOMEMADE Chatterbait (Less than $5). (n.d.). YouTube. https://www.youtube.com/watch?v=oGMqMbn8u5Q
How to make Micro Bladed Jigs. (n.d.). YouTube. https://www.youtube.com/watch?v=S24dRDDt9vg
How To Make A Bladed Jig!. (n.d.). YouTube. https://www.youtube.com/watch?v=kUc9lOTujlY
Make a vibrating jig (NO MOLD NEEDED!!!). (n.d.). YouTube. https://www.youtube.com/watch?v=yYWJsiuZ0g8
MadBite by KastKing Bladed Jig Fishing Lures. (n.d.). Amazon. https://www.amazon.com/dp/B08RK16951
FREE FISHER 148Pcs Spinner Making Kit Spinner Blades... (n.d.). Amazon. https://www.amazon.com/dp/B0DMNZPD9C

Bass Fishing Questions

More Questions

What are the top 4 Bead Head Nymphs for rainbow trout on the Kenai River in August, including size and color?

What are some tips for bass fishing in Lake Tobo, Macon, GA?

Find me funny videos of fishing on tackle.net

What is the best place to fish leccia amia in Salento?

Is a copper frog a good bait to use for morning bass fishing in Georgia?

Is a 4 lb to 8 lb rod okay for yellow bass?

Can you help me find a musky fishing rod combo?

What should a size 100 Calcutta Conquest DC be used for?