how do you get a mold for a glide bait?

Question

FishGPT · Accepted Answer

**Here’s how to grab a glide-bait mold and start pouring friend-grade swimbaits.** Two solid routes, with practical tips you can actually use on the water this fall season.

**1) Buy a ready-made glide-bait mold kit**
- If you want to skip the DIY headaches, go with a dedicated soft-plastic mold in the glide-bait family. A few solid options from FatFish cover common sizes and lure profiles:
  - [FatFish V23-3C Bait Mold Soft Plastic Lure Making Injection Mold for Do-It Fishing Lures 2.8"](https://www.amazon.com/dp/B0721SP61P?tag=tacklenet-20&linkCode=osi&th=1&psc=1)
  - [FatFish W150-4C Bait Mold Soft Plastic Lure Making Injection Mold for Do-It Fishing Lures 3"](https://www.amazon.com/dp/B09P3R6RMD?tag=tacklenet-20&linkCode=osi&th=1&psc=1)
  - [FatFish V21-3C Bait Mold Soft Plastic Lure Making Injection Mold for Do-It Fishing Lures 3"](https://www.amazon.com/dp/B0BJBNR2GS?tag=tacklenet-20&linkCode=osi&th=1&psc=1)
- Why these work: they give you the body shape, lip, and tail geometry that’s proven on the water, plus easier demolding and repeatability for multiple colors.

**2) DIY route with an injector for custom shapes**
- If you’re into tinkering, you can buy a dedicated mold injector and pour your own glides from plastisol:
  - [Dimatteo Mold Injector 120 ml / 4 oz Aluminium Plastisol Soft Fishing Lures Bait Molds Tackle DIY Making](https://www.amazon.com/dp/B0BMDQHC3L?tag=tacklenet-20&linkCode=osi&th=1&psc=1)
- How it helps: you can customize wall thickness, adjust tail soft-ness, and experiment with weight before committing to a full batch.
- Pro tips for DIY pours: use a clean melt pot, keep plastisol temp just hot enough to flow (don’t burn), vent properly, and pour slowly to avoid air pockets. Trim excess flashing after cure with a sharp blade.

**3) Quick-start recipe and finishing touches**
- Start with the right material: clear plastisol or your preferred color base. Add pigments or flakes as you wish, then pour into the cavity and let it cure.
- Weight and balance: glide baits need a well-balanced center of gravity. Plan water resistance and tail kick by adjusting wall thickness and tail shape in the mold.
- Painting and sealing: once cured, lightly sand seams, paint with bass-licensed lure paints, seal with a flexible clear coat for durability.

**4) Fall timing and on-the-water strategy (mid-fall)**
- Weather note: mid-fall often means cooling water and more aggressive predation as fish bulk up for winter. Glide baits shine in slightly cooler, oxygen-rich water where big bass or pike/mike problem fish push shallower seams.
- Color and pattern: natural shad or bluegill tones work well; go slightly brighter on cloudy days, and keep the action slow and deliberate—glide baits excel when “presented” as a wary, coastal predator would react.
- Retrieval: long, smooth sweeps with pauses let the bait glide, then a slow reel-to-retrieve to keep it in the strike zone longer.

**Gear notes:** if you’re buying, the links above offer reliable molds you can rely on again-and-again. If you’re more hands-on, the injector route lets you customize. Either way, practice pours, trim work, and seal up properly for durable lures.

Get out there and start pouring—but remember, patience pays off in fall. Tight lines, and may your glides haunt the big ones. 👊🎣

Question is how do you get a mold for a glide bait?

Related Videos

Product Recommendations

FatFish V23-3C Bait Mold Soft Plastiс Lure Making Injection Mold for Do-It Fishing Lures 2.8"

FatFish W155-6C Bait Mold Soft Plastiс Lure Making Injection Mold for Do-It Fishing Lures 1.8"

Dimatteo Mold Injector 120 ml / 4 oz Aluminium Plastisol Soft Fishing Lures Bait Molds Tackle DIY Making

FatFish W150-4C Bait Mold Soft Plastiс Lure Making Injection Mold for Do-It Fishing Lures 3"

FatFish V25-2C Bait Mold Soft Plastiс Lure Making Injection Mold for Do-It Fishing Lures 3.8"

FatFish V21-3C Bait Mold Soft Plastiс Lure Making Injection Mold for Do-It Fishing Lures 3"

FatFish T02-3C Bait Mold Soft Plastiс Lure Making Injection Mold for Do-It Fishing Lures 2.5"

FatFish V24-2C Bait Mold Soft Plastiс Lure Making Injection Mold for Do-It Fishing Lures 3.3"

Community

Swimbait Questions

Drt tiny Klash g-guard

Dry tiny Klash g-guard

DRT tiny klash tails

DRT tiny klash parts

More Questions

What are the best locations for shore jigging palamitas in sicily

Is licata a good place for shore jigging ?

How do river tides affect bait fish?

What is the best place for halibut fishing in Prince William Sound, Alaska?

Does a saltwater fishing pole work for freshwater, like lakes and ponds?

What is the most productive spot to currently fish in the Monroe, MI area?

What size Mister Twister Curly Tail Grub should I use with a size 6 offset worm hook?

Where is a good place with GPS coordinates to fish in Chesapeake Bay near Kent Narrows?