What must I have to create a custom Heddon Hi Tail lure?

Question

FishGPT · Accepted Answer

Dreaming up a custom Heddon Hi Tail tribute starts with the right basics and a few old-school tricks that work on bass. Below is a practical, bass-fishing–focused guide to getting your own vintage-inspired walker built from the bench to the water. 🪨🎣

**What you’ll need (the core kit)**

- **Wood blank or pre-cut lure body**: Start with a carving-friendly wood like *cedar* or *balsa* for a buoyant, responsive body. If you’re not ready to carve from scratch, grab a few pre-cut wooden lure bodies or blank kits from a tackle supply shop.
- **Pattern/template**: Have a standard Hi Tail silhouette on hand. You’ll trace and rough-cut the shape before detailing. A pattern ensures symmetry when you’re dialing in the classic tail wag.
- **Through-wire system**: For durability and rock-solid action, run a thin steel wire through the length of the lure and anchor it with stubby brass or stainless hardware. This keeps the body from warping and helps with consistent buoyancy. 
- **Tail/fin concept and hardware**: You’ll want a small tail element or fin that mimics the Hi Tail’s wag. Include split rings and at least one treble hook setup (or two treble hooks if you prefer more strike coverage). Check local regulations for hook count.
- **Diving/topwater configuration (lip or no lip)**: Traditional Hi Tail lures rely on a tail-driven action for their wake. A small, shallow lip is optional if you want a slightly different walk-the-dog action, but many anglers build without a lip to preserve topwater buoyancy and tail wag.
- **Paints and coatings**: Acrylics or enamel paints for the base and detail work, plus a durable clear coat such as epoxy or polyurethane to seal and protect the finish from water and fish teeth.
- **Details and optics**: Glass or stick-on 3D eyes, metallic accents, and pattern work to replicate classic Heddon finishes. 
- **Adhesives and sealants**: Two-part epoxy for a strong body seam and a clear topcoat, plus momentary adhesives for hardware and eyes.
- **Tools**: Carving knives or a small gouge, sandpaper (grits from 120 to 600), a Dremel or mini rotary tool, a pin vise for small holes, pliers, and a small crafting brush for fine detail.

**Steps (high-level)**

1) Trace and rough-cut the Hi Tail silhouette from your template. Shape the body with gentle curves so it’s balanced and smooth in the water. 
2) Drill through-holes for the wire and attach the tail hardware. Run a through-wire so you can tune tension and reduce body twist. 
3) Attach a tail fin or wag piece; keep it slim but sturdy so it deforms water and creates that classic wag. 
4) Prime, then base coat with a bass-friendly color pattern you like—think naturals with bold lateral lines. 
5) Add detail paint (belly highlights, lateral stripes) and finish with a clear epoxy or urethane coat for durability. 
6) Fit your hardware (split rings, treble hooks) and test buoyancy and action in shallow water. If it sits too high, seal a little more or add a touch of weight inside the belly. 
7) Fine-tune by adjusting the tail length or coating thickness until you get a clean walk or tail wag that bass can’t resist.

**Inspiration and product links**

- Catch a bit of the vintage lure vibe and action with examples here: [This 65 Year Old "Goober" Lure Works Shockingly Good](https://www.youtube.com/watch?v=tqkV3qGkPYc) • [3 Topwater Bass Fishing Tricks #fishing](https://www.youtube.com/watch?v=fnh0ZGc7Cfo) • [Topwater Action!](https://www.youtube.com/watch?v=qM9HKduF7rE)

- If you’re sourcing parts or testing finishes, these Heddon-inspired options on Amazon are handy references for look and feel:
  - [Heddon Saltwater Super Spook Jr - 3 Pack PK3X9236-2,Multi,One Size](https://www.amazon.com/dp/B09DN719D4?tag=tacklenet-20&linkCode=osi&th=1&psc=1)
  - [Heddon Spin'N Image - Blue Shad - 3.5"](https://www.amazon.com/dp/B0DZPHG1R4?tag=tacklenet-20&linkCode=osi&th=1&psc=1)
  - [Heddon Super Spook Topwater Lure, Multi, 3-Pack](https://www.amazon.com/dp/B084N3ZLPW?tag=tacklenet-20&linkCode=osi&th=1&psc=1)
  - [Heddon X9255-JMP Zara Spook Lure, 4 1/2-Inch, Natural Perch](https://www.amazon.com/dp/B003ZZC6AO?tag=tacklenet-20&linkCode=osi&th=1&psc=1)

**Pro tip for the field**: Start with a lighter clear coat and test buoyancy in a tub or bucket before you go to the river. If the lure rises too fast, reduce coating thickness or move the weight slightly toward the tail to encourage a more tactile tail wag rather than surface boil.

With a little woodshop time and a lot of patience, you’ll have a custom Hi Tail that’s built for bass and tuned for your river, pond, or lake this season. Get out there, experiment, and most importantly—have fun with it. Tight lines! 🐟🎣

Bass Fishing Questions

More Questions

Where to shore fish in Clyde River Ontario?

What size offset worm hook for a 2 inch Mister Twister curly tail grub?

What are the best jigging spots near Nice, France?

What are some of the most common deadly fish?

What is the best size and color for a Pink Pollywog when fishing for Kenai Dolly Varden in August?

What are the differences between Owner STX-38 and STX-45 treble hooks?

What are the best fishing locations in Hong Kong?

Does fishing after rain make it better or harder?